Beckett WFK8S Use and Care Manual download pdf (Page 2)

HELPFUL SITE PLANNING HINTS

Waterfalls generally face the viewing area.

When building your Waterfall, keep in mind you will

need room for easy access to the Waterfall for

maintenance.

STEP 1:

Place the Hose Clamp over one end of the

Tubing.

STEP 2:

Attach the Tubing to the Adapter located at the

Waterfall’s underside and tighten the Clamp to seal.

STEP 3:

Attach the other end of the Tubing to the

Pump.

STEP 4

: Place the Bio-Filter Foam in the bottom of the

Waterfall.

STEP 5:

Place your Lava Rock inside the Mesh Bag

and lay flat on top of the Bio-Filter Foam to prevent the

Foam from floating.

STEP 6:

Build a mound with dirt or stones for your

Waterfall to your desired height.

STEP 7:

Drape the Liner over the mound, including the

back of the mound.

STEP 8:

Place the Waterfall on top of the mound.

STEP 9:

Secure the mound and Waterfall with flat rocks

or bricks. Create a lip with the liner to drain possible leaks

back into the pond

STEP 10:

Place the Pump in the pond.

STEP 11:

Bury the Tubing.

STEP 12:

Fill the Pond with water.

STEP 13:

Read the following information about the

Pump, then plug the Pump into a GFCI receptacle.

STEP 14:

Enjoy your Waterfall!

Primary

Viewing

Area

Waterfall

Tubing

Clamp

Mesh Bag

Lava Rock (Not Included)

Bio-Filter Foam

-2-

Pump

GFCI

Pond

Mound

of Dirt

Waterfall

PVC Liner

1 2 3 4 5 6 7 ... 11 12

Comments to this Manuals

No comments

Beckett WFK8S Use and Care Manual Page 2

Comments to this Manuals

Related products and manuals for Unknown Beckett WFK8S