6104 BCF5 R07 1Potential for Fire, Smoke and Asphyxiation HazardsTo the Homeowner or Equipment Owner:Please read and carefully follow all instructions
10 6104 BCF5 R07Wire the burner — R7184Disconnect electrical power before installing or servic-ing the burner.Provide ground wiring to the burner, met
6104 BCF5 R07 11Keep Service Access Covers Securely InstalledThese covers must be securely in place to prevent electrical shock, damage from exter-nal
12 6104 BCF5 R07Start the BurnerDo not attempt to start the burner when excess oil has accumulated in the appliance, the appliance is full of vapor, o
6104 BCF5 R07 13the control will lock out. Press the reset button to reset the control and return to the functions listed in the previous step.Repeat
14 6104 BCF5 R07Maintenance and ServiceDo not tamper with the burner or controls or make any adjustments unless you are a trained and qualifi ed servic
6104 BCF5 R07 15Replacement parts12310984567111213151416Item Part Name/Description Part Number1 Air Tube Specify2 Spline Nut 36663 Adjusting plate ass
16 6104 BCF5 R07LimitedWARRANTYFor Residential, Commercial and Specialty Burners The R. W. BECKETT CORPORATION (“Beckett”) warrants to persons who pur
2 6104 BCF5 R07 Table of ContentsGeneral Information ...2-4Hazard Defi nitions ...
6104 BCF5 R07 3Hazard defi nitionsIntended to bring special attention to information, but not related to personal injury or property damage.NOTICEIndic
4 6104 BCF5 R07Combustion air supplyThe burner requires combustion air and ventilation air for reliable operation. Assure that the building and/or com
6104 BCF5 R07 5Fuel supplyThe fuel supply piping and tank must provide #1 or #2 fuel oil at pressure or vacuum conditions suitable for the fuel unit (
6 6104 BCF5 R07Verify burner components —Burner, Model CF500 or CF800Air tube assembly Mounting fl ange kitOil nozzle, per Table 1 — Only 45° to 70° so
6104 BCF5 R07 7Mount the burnerMount fl ange(s) on air tubeThis section does not apply to burners with welded fl ang-es.Do not install air tube on burne
8 6104 BCF5 R0750001End view Side view3/16” - 7/32”gap1/4” in frontof nozzle3/16” abovenozzle centerRPQInstall nozzle line assemblyInsert the nozzle l
6104 BCF5 R07 9125-200 psig125-200 psig3502The burner is shipped without the by-pass plug in-stalled.Intall the by-pass plug in two-pipe oil supply sy
Comments to this Manuals